Vox Tonelab ST Owner's Manual page 10

Modeling effect processor
Hide thumbs Also See for Tonelab ST:
Table of Contents

Advertisement

d. EXP PARAM (Expression Parameter) switch
This lets you specify the maximum value and minimum value of
the parameter that's assigned to the pedal. For details, refer to
"Expression pedal minimum and maximum values" (p.25).
If the QUICK ASSIGN LED is lit, holding down this switch for
approximately two seconds will assign a effect parameter to the
expression pedal (p.24, "Assigning a function to the expression
pedal (Quick Assign)").
e. QUICK ASSIGN LED
This will light when the Quick Assign function is available, and
will blink when you're specifying the variable range of the
expression pedal.
6
7. Expression pedal section
a. EXP LED
This will light when the effect
assigned to the expression pedal is on.
b. Expression pedal
This controls the function that's
assigned to the expression pedal (e.g.,
volume or wah), or controls the
parameter of some other effect.
If you firmly advance the expression
pedal all the way forward, the effect
assigned to the pedal will be switched
on/off.
If volume is assigned to the expres-
sion pedal, advancing the pedal in
this way will not turn off the volume
pedal.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents