Rear Panel - Vox Tonelab ST Owner's Manual

Modeling effect processor
Hide thumbs Also See for Tonelab ST:
Table of Contents

Advertisement

Rear panel

1. Valve
The internal 12AX7 (ECC83) vacuum tube is located here.
NOTE: The vacuum tube may break if it is subjected to phys-
ical impact. Be careful not to subject the ToneLab ST to strong
physical impact.
2. USB connector (Type B)
If you use a commercially available USB cable to connect the
ToneLab ST to your computer, you'll be able to use librarian soft-
ware on your computer to manage user programs, or use the
ToneLab ST as a USB audio interface.
3. Cable hook
Wrap the cable of the AC adapter around this hook to prevent
the AC adapter from being accidentally disconnected.
For details, refer to "Making connections" (p.8).
4. DC12V connector
Connect the included AC adapter here.
NOTE: The included AC adapter is only for use with the
ToneLab ST. Using it with any other device may cause mal-
functions, so you must never do so.
5. STANDBY switch
This turns the power on or off.
6. INPUT connector
Connect your guitar cable here.
7. AUX IN jack
This is a stereo mini-jack to which you can connect the output
(analog output) of an audio device.
You can connect a CD or MP3 player here, and play along on the
guitar while listening to your favorite songs. To adjust the vol-
ume, use the controls of the connected device.
8. OUTPUT/PHONES jack
Connect your guitar amp, mixer, or headphones here. This jack
will accommodate either stereo or monaural connections.
9. LEVEL knob
This adjusts the output level of the OUTPUT/PHONES jack.
10.AMP/LINE switch
The correct setting of this switch will depend on what is con-
nected to the OUTPUT/PHONES jack.
For details, refer to "Making connections" (p.8).
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents