Saving A Program; 保存一个编程 - Vox ToneLab ST Owner's Manual

Turning the knob toward the right will increase the amount of noise
reduction.
Turning the knob all the way to the left will turn noise reduction off;
it will have no effect.
NOTE: Depending on the guitar you're using, excessively high settings
of noise reduction may cause notes to be cut off unnaturally.
2、转动 MIDDLE 控制器，调节噪音降低的灵敏度。
向右转动旋钮可以提升降噪的数量。
把旋钮转到最左边就会关闭降噪功能；其将不起任何作用。
注意：根据你所使用的吉他不同，如果过分的调高降噪的设置，可能会导致音符
被不自然的削减。
3. When you've finished making settings, press the EXIT/ TUNE switch.
3、当你完成了设置之后，点击 EXIT/TUNE 按钮即可

Saving a program

保存一个编程
When you've come up with a sound you like, here's how to save (write)
it.
NOTE: If you switch to a different program or turn off the power before
saving, the changes you've made will be discarded, and the settings will
revert to their original state.
当你找到了自己喜欢的声音，就该考虑如何对它进行保存（写入） 。
注意：在保存之前，如果你切换到另外一个编程音色或者关闭了电源，那么你所
做出的更改就会被丢弃，这些设置也都会回到它们的初始状态。
1. Press the WRITE switch.
The program display and the UP/DOWN pedal LEDs will blink.
1、点击 WRITE（写入）按钮。
编程音色的显示屏和上下踏板的 LED 指示灯会闪烁。
2. Press the UP or DOWN pedal to select the user program (No.0–49) in
which you want to save your settings.