Auto Channel Setting; Manual Channel Setting - Philips VR1200/02 User Manual

S
S
E T T I N G E T T I N G
E T T I N G

Auto Channel Setting

If you move to another place, you may need to
tune the VCR tuner again for your new residential
area.
1 1 1 1 1 Press VCR.
2 2 2 2 2 Press MENU.
3 3 3 3 3 Press 5 or ∞ to select "AUTO TUNER SET
UP", then press OK/STATUS.
4 4 4 4 4 Press 5 or ∞ to select your country's name,
then press OK/STATUS.
5 5 5 5 5 Press 5 or ∞ to select your preferred lan-
guage, then press OK/STATUS.
6 6 6 6 6 Press 5 or ∞ to select "AUTO CH. SET",
then press OK/STATUS.
AUTO CH. SET
PLEASE WAIT
+
B
END : MENU
Beginning
The Auto Set screen appears, and remains on
screen while the recorder searches for
receivable stations. As Auto Channel Set
progresses, the " " mark on the screen moves
from left to right.
• When you connect VCR to TV equipped
with T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link, DATA LOGIC or
NEXTVIEWLINK function via fully-wired
21-pin SCART cable and the TV is turned
on, the VCR automatically performs Follow
TV instead of Auto Channel Set.
7 7 7 7 7 Once it is completed, "AUTO CH. SET
COMPLETED" is displayed on the screen for
about 5 seconds.
The following screen will appear after 5
seconds or if you press MENU.
PR CH ID
01 25 ARD
02 C08 SKY1 09
03 10 ZDF
04 C65 RAI1
05 C31 BBC1 12
06 C32 BBC2 13
07 C24 BBC4 14
SELECT : 5∞23
EDIT : OK
ERASE : CLEAR
END : MENU
C: Cable
PR: channel positions
CH: channel numbers
ID: station names (✈P.19)
U
( C ( C
P P
( C
P
O N T I N U E D O N T I N U E D
O N T I N U E D
+
E
End
PR CH ID
08 C26 E-SP
C33 3SAT
10 55 WEST
11 C24 SAT1
C23 OSF
C25 ESPN
C48 20G
) )
)
• The blueback screen and the programme
currently being broadcast by the blinking
station appear alternately for 8 seconds
each.
• To view the next page, use the 5∞23
button on the remote control. The stations
located in the selected country appear at the
top of the list.
• The Guide Channel numbers will also be set
automatically during Auto Channel Set.
8 8 8 8 8 Press MENU to exit the menu operations.
Notes:
• If you perform Auto Channel Set when the
aerial cable is not connected properly, "NO
TV SIGNALS" appears on the screen in step
7. When this happens, make sure of the
aerial connection and press OK/STATUS;
Auto Channel Set will take place again.
• Depending on reception conditions, the
stations may not be stored in order, and the
station names may not be stored correctly.

Manual Channel Setting

When you want to do channel setting manually,
perform the following procedures as required.
• If you want to ......
......add channels (See below)
......delete unwanted channels (See page 17)
......change the channel positions
(See page 17)
......perform fine-tuning (See page 18)
......descramble programmes when receiving
scrambled broadcasts (See page 18)
......change station names (See page 18)
If you want to add channels
1 1 1 1 1 Press VCR.
2 2 2 2 2 Press MENU.
3 3 3 3 3 Press 5 or ∞ to select "MANUAL TUNER
SET UP ", then press OK/STATUS.
4 4 4 4 4 Press 5∞ 23 until a vacant position in
which you want to store a channel begins
blinking.
— —
16