Table of Contents
Advertisement
T
R
S
I M E R
I M E R
I M E R
Notes:
• The Auto SP-->LP Timer feature is not
available during OTR (One Touch Record-
ing) and the feature will not work properly
with any tapes longer than E-180 or with
some tapes of shorter lengths.
• If you have programmed the recorder to
timer-record 2 or more programmes, the
second programme and those hereafter may
not fit on the tape if you set "AUTO SP-->LP
TIMER" to "ON". In this case, make sure
the mode is not engaged, then set the tape
speed manually during timer programming.
• In order to ensure that the recording fits on
the tape, this feature may leave a short non-
recorded section at the end of the tape.
• There may be some picture noise and sound
disturbance at the point on the tape where
the recorder switches from SP to LP mode.
• If you perform timer recording with both
VPS/PDC and the Auto SP-->LP Timer
activated, and the programme goes beyond
its originally scheduled length, there may be
times when the programme cannot be
recorded in its entirety.
To check, edit or erase the programmes
1 1 1 1 1 Press VCR.
2 2 2 2 2 Turn on the VCR and TV.
3 3 3 3 3 Press TIMER.
4 4 4 4 4 Press 5 or ∞ to select
"PROGRAM REVIEW"
then press OK/STATUS.
The list of the timer
recording programmes appears.
5 5 5 5 5 Press OK/STATUS
repeatedly to view the
more detailed programme
information.
• When you press the
button for the first time,
the detailed programme
information for Programme 1 appears. By
pressing this button repeatedly, you can
review the detailed information of all other
programmes.
6 If you want to change the programme
setting shown on the TV screen, press the
following buttons:
START +/– : Changes the start time.
STOP +/– : Changes the stop time.
E C O R D I N G
E C O R D I N G
E C O R D I N G
PR CH START
STOP
DATE
1
12 08:00
10:00
15/06
2
10 10:00
10:45
14/08
3
45 03:00
03:15 D 15/10
4
24 11:30
13:15
DAILY
5
20 20:00
21:00 W 18/10
6
7
8
NEXT : OK
END : TIMER
ONE TIME PROGRAM
PROGRAM
1
TV PROG +/-
12
START +/-
08:00
STOP +/-
10:00
REC SPEED
SP
VPS/PDC
ON
DATE +/-
15/06/00
THURSDAY
ERASE : CLEAR
END : TIMER
PREV : 3
NEXT : OK
( C
( C
( C
O N T I N U E D
O N T I N U E D
O N T I N U E D
ALT/SPEED : Changes the tape speed.
VPS/PDC : Changes the setting of the video
DATE +/– : Changes the date.
CH 5/∞
If you want to erase the programme setting
shown on the TV screen, press CLEAR. The
detailed information of the next programme
appears.
7 Press TIMER to exit the menu operations, if
necessary.
How to see the programme list
1 2 3 4
PR
CH
1
12
2
10
3
45
4
24
5
20
6
7
8
NEXT : OK
END : TIMER
1 Programme numbers
2 Channel position numbers
3 Start time
4 Stop time
5 Start date
• If the programme has worked once for the
Daily recording, "DAILY" will be shown
instead of the start date.
• If the programme has worked once for the
Weekly recording, the following week's
date will be shown instead of the start date.
Notes:
• Even if a power failure occurs, the VCR
keep your timer programs. However the
clock time and other menu settings are lost if
it last for than 10 minutes. As a result when
the power is supplied again to this VCR
after the power failure, set the clock time
and turn off the VCR. Each timer program
you have made will start unless it start time
already passes.
—
—
30
) )
)
programme system.
: Changes the channel.
5
START STOP
DATE
08:00
10:00
15/06
10:00
10:45
14/08
03:00
03:15 D 15/10
11:30
13:00
DAILY
20:00
21:00 W 18/10
Hide quick links:
Advertisement
Table of Contents
