Philips VR1200/02 User Manual page 38

Hide thumbs Also See for VR1200/02:
Table of Contents

Advertisement

S
Notes:
• Pressing the POWER or STANDBY/ON
button while Automatic Satellite Programme
Recording mode or stand-by mode is in
progress will cancel the mode and "AUTO
SAT RECORD LINK" is set back to "OFF"
automatically.
• Be sure not to turn on the satellite tuner
before the programme is executed otherwise
the VCR will start recording when the
satellite tuner's power is turned on.
• Depending on the type of satellite tuner, the
VCR may not record a slight portion of the
beginning of the programme or may record
slightly longer than the actual length of the
programme.
• While the VCR is in Automatic Satellite
Programme Recording or stand-by mode,
normal timer recording will not perform.
• "Err L-2" will appear if you engage the
Automatic Satellite Programme Recording
mode while the satellite tuner power is on.
Turn off the satellite tuner. However, if
"Err" will not disappear even though the
satellite tuner is turned off, Automatic
Satellite Programme Recording function
will not work properly with that satellite
tuner.
S-VHS ET
This VCR allows recording in Super VHS ET
(Expansion Technology) mode. You can record
with S-VHS picture quality on VHS cassettes.
However, this function is available only for SP
recording.
1 Press the S-VHS ET button on the front panel
to select S-VHS ET recording mode before
recording. The lamp will lit.
2 Press the button again to cancel S-VHS ET
recording mode after recording.
Notes:
• "S-VHS ET" setting cannot be changed
during recording, timer recording, or when
the VCR's power is off.
Also, this function does not work with S-VHS
tapes.
• To obtain the highest quality recording and
playback pictures over a longer period on
this model, S-VHS recording on S-VHS tape
is recommended.
• You can playback S-VHS ET recordings not
only on this VCR but also on another VCR
equipped with S-VHS ET.
• It is recommended to specifically label
S-VHS ET recordings so you can easily
distinguish them from regular VHS record-
ings.
• S-VHS ET recordings can also be played
back on an S-VHS VCR. However, there may
be cases where S-VHS ET playback is not
possible on a particular VCR.
• Frequent still, frame-by-frame and slow-
motion playback may damage the tape and
cause picture degradation.
• With some tapes, better picture quality may
not be obtained even with S-VHS ET
recording. It is recommended that you do test
record beforehand to make sure whether
better results can be obtained.
• High Grade tapes are recommended for
superior results.
• If the playback picture becomes blurred or
interrupted, use a cleaning cassette.
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vr1200

Table of Contents