Philips VR1200/02 User Manual page 24

M F
S
A I N A I N
A I N
Tape List
The Philips Tape List is a very helpful assistant.
The Tape List will tell you on which tape you find
your recorded programmes.
Every recording will be memorised (date, start
time and channel) and the tapes will be given
unique numbers to identify them.
Find a Title
This function is useful when you wish to quickly
find out what programmes you have recorded on a
tape using this VCR. It allows you to select a
programme to watch, and then automatically
searches for the start of the programme.
1 1 1 1 1 Insert a recorded cassette. The tape will run for
a few seconds to search for the tape data.
"CHECKING TAPE DATA" will appear on
the screen.
2 2 2 2 2 Press VCR.
3 3 3 3 3 Press TAPE LIST. The following screen will
appear.
27/02/01
28/02/01
15/01/01
\ – –/– –/– – – –:– –
5∞\ OK
TITLE : EDIT
The tape ID no. appears on the display
window. For example,
If "TAPE DATA CANNOT BE DETECTED"
appears on the screen after pressing TAPE LIST, the
programme list of the lowest tape ID will appear
after few seconds.
If no cassette is inserted, the programme list of the
lowest tape ID will also appear. In either case, you
can press 3 or 2 to view the programme list for
other tape ID.
4 4 4 4 4 Press 5 or ∞ to select the programme you
want to watch.
\ 27/02/01
28/02/01
15/01/01
– –/– –/–
5∞\ OK
TITLE : EDIT
E A T U R E S E A T U R E S
E A T U R E S
20:00 BBC1
22:15 PR. 07
08:15 BBC2
PR . 29
DELETE : CLEAR
END : T. LIST
20:00 BBC1
22:15 PR. 07
08:15 BBC2
– –:– – PR. 29
DELETE : CLEAR
END : T. LIST
5 5 5 5 5 Press OK/STATUS. The VCR searches for the
programme along the tape.
B – – – – – + – 7 – – + – – – – – + – – – – E
REMAIN
Playback begins automatically after the
selected programme is located. Press ∞ if you
wish to stop the tape at the beginning of the
programme.
Notes:
• The VCR can store up to 10 tape IDs.
• Each tape ID can have a maximum of 8
programmes.
• It may take a few seconds to display pro-
gramme list.
• Tape List is possible with the cassettes
recorded with this VCR only.
• To record the date and time as the pro-
gramme title in this VCR's memory, make
sure the VCR's clock is set correctly before
recording.
• To record the programme information in this
VCR's memory, you must record each
programme for over the minimum continuous
recording time; 8 minutes for the SP mode,
15 minutes for the LP or 23 minutes for the
EP mode.
• After recording a tape with this VCR, write
the tape number on a label and affix the label
to the tape in order to allow you to find the
tape by its number. The tape number will be
assigned and appear on the screen once you
eject the recorded tape.
• If the Tape List does not show the content of
the inserted tape, rewind the tape to a recent
recording and press the TAPE LIST button
again.
• The programme information is stored in this
VCR's memory. If the memory in this VCR
should ever be damaged and the programme
information is lost, it is impossible to restore
that information.
— —
25
SEARCHING
3:26
-10:23:45
To be continued on next page