Automatic Operations - Philips VR1200/02 User Manual

B O
S
A S I C A S I C
A S I C
To prevent accidental erasure:
Break off the record
tab with a screwdriver.
To record again:
Cover the opening
with adhesive tape.

Automatic Operations

Auto playback
When a tape is inserted, the VCR turns on. If the
record tab is removed, playback begins.
Auto rewind
When a tape reaches its end during playback, fast
forwarding or manual recording, the VCR
rewinds the tape and stops.
Repeat playback
When you press and hold PLAY 3 for more than
5 seconds, you can playback the same tape
repeatedly (100 times).
Press STOP I at any time to stop playback.
When the tape runs to its end, the VCR automati-
cally rewinds the tape, and starts playback.
• Repeat playback does not function in SLP
mode.
Memory rewind power off
When you press POWER within 2 seconds after
rewinding starts, the VCR turns off after rewind-
ing is completed.
Eject cassette
You can eject the tape simply by pressing STOP/
EJECT 7/0 on the front panel even while the
VCR is turned off.
When you press STOP/EJECT 7/0 on the front
panel, the VCR automatically turns on, ejects the
tape, then turns off.
P E R A T I O N S P E R A T I O N S
P E R A T I O N S
Adhesive tape
( C ( C
( C
O N T I N U E D O N T I N U E D
O N T I N U E D
— —
24
) )
)