Philips VR1200/02 User Manual page 9

S
S
E T T I N G E T T I N G
E T T I N G
5 5 5 5 5 Press OK/STATUS. The Language Set display
appears on the screen and/or display window.
• If you are referring to the display window,
press 5/∞ to select your language code,
then press OK/STATUS. Skip step 6 and go
to step 7.
Language Code
ENGLISH : 01
DEUTSCH : 02
FRANCAIS : 03
ITALIANO : 04
CASTELLANO : 05
NEDERLANDS : 06
SVENSKA : 07
International Telephone
Country Code
In this example, DEUTSCH is selected for
SUISSE.
• If you are referring to the on-screen display,
press 5/∞ to select your language, then
press OK/STATUS. Skip step 6 and go to
step 7.
NEXT PAGE
NORSK
SVENSKA
NEDERLANDS
CASTELLANO
ITALIANO
FRANCAIS
\ DEUTSCH
ENGLISH
SELECT : 5∞
CONFIRM : OK
END : MENU
6 6 6 6 6 Press OK/STATUS. The Clock Set screen will
appear. Press 5/∞ to set the time and then
press OK/STATUS. The "TIME" display
begins blinking. Repeat the same procedure to
set the date and year. Press MENU when clock
setting is finished.
-
TIME --:-- - -:- -
DATE 01/01/01
SET : 5∞
NEXT : OK
END : MENU
• When you set the time, press and hold 5/∞
to change the time by 30 minutes .
• When you set the date, press and hold 5/∞
to change the date by 15 days.
7 The following display appears on the screen
U
( C ( C
P P
( C
P
O N T I N U E D O N T I N U E D
O N T I N U E D
NORSK : 08
SUOMI : 09
DANSK : 10
POLSKI : 11
ˇ ˇ
CESTINA : 12
MAGYAR : 13
: 14
ZPSR
Language Code
—
) )
)
and/or display window.
• If you use the Auto Set Up function, go to
Auto Set Up below.
• If you use the Follow TV function, go to
Follow TV on page 12.
\ AUTO CH.SET
FOLLOW TV
SELECT : 5∞
CONFIRM : OK
END : MENU
A A uto Set S Up U
Before performing the following steps, be sure to
finish Preparation on page 9.
1 1 1 1 1 • If you are referring to the display window,
press 5/∞ to select "Auto" and press OK/
STATUS.
• When you connect VCR to TV equipped
with T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link, DATA LOGIC or
NEXTVIEWLINK function via fully-wired
21-pin SCART cable and the TV is turned
on, the VCR automatically performs Follow
TV instead of Auto Set Up.
• If you are referring to the on screen display,
press 5/∞ to select "AUTO CH SET" and
press OK/STATUS.
\ AUTO CH. SET
FOLLOW TV
SELECT : 5∞
CONFIRM : OK
END : MENU
As AUTO CH. SET progresses, the " - "
mark moves from left to right.
—
10
AUTO CH. SET
PLEASE WAIT
+ +
B
END : MENU
Beginning
E
End