Philips VR1200/02 User Manual page 50

S
If the top of your playback picture waves
back and forth excessively.
During playback, "USE CLEANING
CASSETTE" appears on the screen and "U:01"
appears on the display window.
Remote Control
The remote control cannot work.
Miscellaneous
A cassette cannot be inserted.
The cassette does not eject.
The cassette ejects when you press REC/
OTR ¶, or when you press POWER or
STANDBY/ON to set timer recording.
• Because the VCR playback signal is not as
stable as an off-the-air TV signal, the top of
your TV screen may be bent or unstable
during playback. To solve this problem,
slowly turn the horizontal hold control on
your TV to correct the wavy picture. If your
TV does not have the horizontal hold control
or adjusting the control does not help,
contact your local TV service center.
• The video heads are dirty. Use a head
cleaner.
Correction
• Aim the remote control directly at the
remote sensor on the VCR.
• Avoid all obstacles which may interfere with
the signal path.
• Inspect or replace the batteries. (✈P.6)
• Make sure the batteries are inserted cor-
rectly. (✈P.6)
Correction
• Insert the cassette with the window side up
and the record tab facing you.
• Check that a cassette tape is not already
inserted. Press STOP/EJECT 7/0.
• Make sure the AC power cord is correctly
connected to an AC outlet.
• If the (Timer) indicator is lit on the
display, press POWER or STANDBY/ON
to cancel timer recording, then press STOP/
EJECT 7/0.
• Make sure the record tab on the back of the
cassette is not removed. (✈P.24)
— —
51