Connection To A Satellite Tuner (Simple Connections) - Philips VR1200/02 User Manual

S S
Y S T E M Y S T E M
Y S T E M

Connection to a Satellite Tuner (Simple Connections)

Outdoor
Unit
Satellite Tuner Unit
DECODER
This is an example of simple connection if you
don't have a decoder.
Connect the satellite tuner to the VCR's AV2
(L-2) IN/DECODER connector, then connect the
VCR's AV1 (L-1) IN/OUT connector to the TV's
21-pin SCART connector.
IMPORTANT
When you set "A/V2 SELECT" to "SAT" (✈P.37), it is possible to view a satellite broadcast with the TV
set to its AV mode even if the VCR is turned off. When the VCR is in Stop mode or recording, press VCR/
TV on the remote control to turn off the VCR indicator on the display window. If you turn on the VCR
when the satellite tuner's power is off, nothing appears on the TV. In this case, turn on the satellite tuner,
or set the TV to its TV mode, or press VCR/TV to light the VCR indicator.
C
O N N E C T I O N S O N N E C T I O N S
O N N E C T I O N S
Aerial
Satellite Cable
VCR TV
Mains
outlet
OUT
S
SORTIE
AUDIO
AUDIO
OUT
PAUSE
TELEC.
LP20916-003B
—
Aerial
connector
TV Aerial
- cable
ANT. IN
RF
OUT
21-pin AV input
connector
(SCART)
IN/OUT
ENTREE/SORTIE
AV1 (L-1)
SAT CONTROL
CONTROLEUR SAT
IN/DECODER
R
ENTREE/SORTIE
RF OUT
AV2 (L-1)
ANTENNE
SORTIE
LP20916-003B
Notes:
• Set "A/V2 SELECT" to "A/V". (✈P.37)
• You can use Automatic Satellite Programme
Recording function (✈P.38) with this
connection.
• To record a programme via the satellite
tuner, select L-2 mode by pressing Number
button "0" and/or CH 5/∞ so that "L-2"
appears on the display window.
• For details, refer to the instruction manual
for the satellite tuner.
—
43
Back of TV
ANT. IN
ANTENNE
ENTREE
To be continued on next page