Using The Inbox; Carrier Voip; Nortel Ip Phone 1150E User Guide (Cicm - Nortel 1150E User Manual

.

Using the Inbox

The IP Phone 1150E has a dedicated fixed key for the Inbox. The system
logs the incoming key name, number, time and date, as well as the display
shown on the IP Phone at the time of the incoming call. The information
from the display is captured only if the call lasts longer than two seconds.
The Inbox can store a maximum of 10 calls. When the maximum is
reached, the oldest call is dropped. Calls appear in the list in the order in
which they were received, with the most recent call at the top of the list.
Use the up and down navigation keys to scroll through the list.
The call display consists of a time or date stamp, and a name or number.
A time stamp appears beside calls you receive on the same day on which
you view the Inbox. A date stamp appears beside calls that arrive prior to
the day of viewing. If no name or number was extracted from the display, a
No Details message appears.
If you missed a call and the caller did not leave a voice message, the
message waiting lamp is illuminated without interruption. If you missed a
call and the caller left a voice message, the message waiting lamp may be
turned on without interruption, or it may flash, flicker, wink, twinkle or blink,
depending on the arrangements made by the system administrator. The
lamp turns off after you retrieve the waiting message.
See
the key.
Follow these procedures to use the Inbox.
Navigation
•
•
•
•
Copyright © 2009 Nortel Networks
.
Figure 1 "IP Phone 1150E components" (page 10)
"Accessing the Inbox" (page 92)
"Viewing Inbox call information" (page 92)
"Storing a number from the Inbox" (page 93)
"Using the Inbox to make a call" (page 93)

Carrier VoIP

Nortel IP Phone 1150E User Guide (CICM)

NN10300-025 04.01 Standard
24 April 2009
91
for the location of