Enabling Or Disabling Autoscroll; Enabling Or Disabling The Inbox - Nortel 2004 User Manual

4
5

Enabling or disabling autoscroll

If autoscroll is enabled, the IP Phone automatically directs you to the screen
for the active feature. For example, if your secondary Directory Number
(DN) is configured on screen two, and you receive a call to that number, the
feature screens scroll to page two. You can answer the call immediately
without searching for the screen.
Follow this procedure to enable or disable the AutoScroll feature.
Step
1
2
3
4
5
6

Enabling or disabling the Inbox

Follow this procedure to enable or disable the Inbox feature.
Copyright © 2006, Nortel Networks
.
The directory contact list opens.
Scroll through the list and select the entry to assign to the feature key.
Press Ok.
A check mark appears beside that entry in the directory. The number
is dialed when you press the key.
Action
From the main menu, open the Feature menu.
From the Feature menu, select and open Assign.
The Assign menus opens.
From the Assign menu, select AutoScroll.
Press Ok.
The AutoScroll screen appears.
Perform one of these actions:
• To enable autoscroll, select Enable.
• To disable autoscroll, select Disable.
Press Ok.
A check mark appears beside the option you selected. You return to
the Assign menu.
Carrier VoIP
Nortel IP Phone 2004 User Guide
NN10300-009 06.04 Standard
(I)SN09U 20 October 2006
Using the Assign menu 27
—End—
—End—
Nortel Networks Confidential