Changing The Default Volume; Resetting The Default Volume Of The Headset; Carrier Voip; Nortel Ip Phone 1150E User Guide (Cicm - Nortel 1150E User Manual

60 Using the Audio menu
3
4
5

Changing the default volume

Follow this procedure to change the default volume of the headset, ringer,
or buzzer.
Step
1
2
3
4
5

Resetting the default volume of the headset

Follow this procedure to reset the default volume of the headset.
Step
1
Copyright © 2009 Nortel Networks
.
The Profile screen appears, showing your audio profile. If you
have permission to edit your profile, a check mark appears
beside the active profile.
If you have permission, and you want to edit your audio profile,
press Ok or press the send key.
A list of available profiles appears.
Select the profile you want.
A check mark appears beside the selection.
Press Ok or press the send key, to save the setting.
The new profile is saved and you return to the main menu.
Action
From the main menu, select and open Audio.
The Audio menu opens.
Navigate through the menu and select Default Volumes.
The Default Volumes menu opens.
Select the item to change.
Perform one of these actions:
•
Use the right navigation key and scroll to increase the
volume.
•
Use the left navigation key and scroll to decrease the volume.
Press Ok or press the send key.
The selected volume is applied the next time the item is used.
Action
From the main menu, select and open Audio.
The Audio menu opens.

Carrier VoIP

Nortel IP Phone 1150E User Guide (CICM)

NN10300-025 04.01 Standard
24 April 2009
--End--
--End--