While On A Non-Acd Call; Using Call Hold; Transferring A Call; Carrier Voip - Nortel 1150E User Manual

.

While on a non-ACD call

Follow these procedures to put a call on hold, transfer a call, use the mute
key, and use the conference call feature when the call is not an Automatic
Call Distribution (ACD) call.
See
of the keys.
Navigation
•
•
•
•

Using call hold

The Hold feature allows you to suspend the call without terminating it.
Follow this procedure to use the hold feature.
Step
1
2

Transferring a call

Follow this procedure to transfer the call to another extension.
Copyright © 2009 Nortel Networks
.
Figure 1 "IP Phone 1150E components" (page 10)
"Using call hold" (page 49)
"Transferring a call" (page 49)
"Using conference call" (page 50)
"Using the mute feature" (page 50)
Action
To put the call on hold, press the hold key.
The call is suspended. On the display, an indicator flashes
beside the line on which the call is held.
Press the key beside the flashing indicator in the display.
The call is active again.

Carrier VoIP

Nortel IP Phone 1150E User Guide (CICM)

NN10300-025 04.01 Standard
24 April 2009
for the location
--End--
49