Toshiba e-STUDIO453 Service Manual page 79
Hide thumbs
Also See for e-STUDIO453:
- Service handbook (764 pages) ,
- Operator's manual (362 pages) ,
- Printing manual (356 pages)
Table of Contents
Advertisement
[L] MJ-1101 (Console finisher)
(1) Turn the power OFF and unplug the power
cable.
(2) Take off the connector cover and disconnect
1 connector.
(3) Open the front cover of the finisher. Remove
1 screw and slide the lever to the front side.
(4) Take off the finisher.
Note:
When moving the finisher unit by itself, be
careful that it does not topple over.
[M] MJ-6101(Hole punch unit)
(1) Turn the power off and unplug the power
cable.
(2) Take off the connector cover and disconnect
the connector.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-673
Fig. 2-674
Fig. 2-675
Fig. 2-676
2 - 59
e-STUDIO350/352/353/450/452/453
05/11
OUTLINE OF THE MACHINE
2
Advertisement
Table of Contents
