Relation Between System Configuration And Ih Output - Toshiba e-STUDIO453 Service Manual

13.4.4 Relation between system configuration and IH output

e-STUDIO350/450
System configuration
Equipment only
Equipment and
(*1)
RADF
(*1)
Equipment, RADF
and FIN
(*1)
Equipment, RADF
FIN, and HPU
(*1)
Equipment, RADF
FIN, HPU and LCF
(*1)
Equipment, RADF
FIN, HPU, LCF and
FAX
e-STUDIO352/353/452/453
System configuration
Equipment only
Equipment and
RADF (*1)
(*1)
Equipment, RADF
and FIN
(*1)
Equipment, RADF
FIN, and HPU
(*1)
Equipment, RADF
FIN, HPU and LCF
(*1)
Equipment, RADF
FIN, HPU, LCF and
FAX
* RADF: Reversing Automatic Document Feeder, FIN: Finisher, HPU: Hole Punch Unit,
LCF: Large Capacity Feeder, FAX: FAX unit
(*1) The wattage lowers 50 W more when the scanning is performed from the RADF during warming up.
(*2) AC power should be input voltage when the equipment is warming up (The lower the voltage is,
the longer the warming up time becomes).
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
(*2)
Warming up Ready
1240-1200W
1220-1140W
,
700W
,
1160-1080W
,
(*2)
Warming up Ready
1300-1200W
1280-1180W
,
700W
,
1260-1160W
,
13 - 7
07/11
Energy Saving
Printing
Mode
980W OFF
Energy Saving
Printing
Mode
980W OFF
e-STUDIO350/352/353/450/452/453
FUSER UNIT / PAPER EXIT SECTION
Automatically
OFF
OFF
Automatically
OFF
OFF
13