Toshiba e-STUDIO453 Service Manual page 187

(12) Remove 3 screws and take off the left trans-
port guide.
(13) Remove 2 screws and take off the registra-
tion front guide.
Note:
Be careful not to deform or damage the
roller supporting section when installing or
taking off the registration front guide.
(14) Remove 1 screw and take off the registra-
tion sensor with bracket.
(15) Disconnect the connector, release the latch
to take off the registration sensor.
(16) Disconnect the connector, take off the upper
drawer feed sensor.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Left transport
guide
Fig. 9-444
Fig. 9-445
Registration
sensor
Fig. 9-446
Connector
Fig. 9-447
9 - 21 e-STUDIO350/352/353/450/452/453
Screw
Roller supporting
section
Registration
front guide
Screw
Screw
Connector
Upper drawer
feed sensor
PAPER FEEDING SYSTEM
9