Toshiba e-STUDIO453 Service Manual page 281
Hide thumbs
Also See for e-STUDIO453:
- Service handbook (764 pages) ,
- Operator's manual (362 pages) ,
- Printing manual (356 pages)
Table of Contents
Advertisement
(4) Remove the screw and release the rear
latch.
(5) Remove 4 screws and take off the bracket.
(6) Remove the clip, pulley, pin and belt on the
rear side.
(7) Remove the clip on the front side.
(8) Remove 2 bushings and take off the upper
transport roller.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Rear latch
Fig. 14-525
Screw
Fig. 14-526
Belt
Clip
Fig. 14-527
Fig. 14-528
4 - 7
e-STUDIO350/352/353/450/452/453
Screw
Bracket
Pin
Pulley
Upper transport roller
Bushing
Clip
Bushing
AUTOMATIC DUPLEXING UNIT
14
Advertisement
Table of Contents
