Output Channel - Toshiba e-STUDIO453 Service Manual

15.3 Output Channel

The followings are five output channels which are not linked with the door switch.
(1) +3.3V
(2) +5.1V
15
(3) +12V
(4) -12V (e-STUDIO350/450 only)
(5) +24V (e-STUDIO350/450 only)
e-STUDIO350/352/353/450/452/453
POWER SUPPLY UNIT
+3.3VA : CN412
Output to the SYS board
+3.3VB : CN412
Output to the SYS board
+3.3VB : CN413
Output to the LGC board
+3.3VB : CN415
Output to the SLG board
+5.1VA : CN412
Output to the SYS board
+5.1VB : CN412
Output to the SYS board
+5.1VB : CN413
Output to the LGC board, PFP/ LCF ( via LGC board ),
Bridge unit / Job separator / Offset tray (via LGC board)
+5.1VB : CN413
Output to the FIL board or FUS board
+5.1VB : CN415
Output to the RADF
+5.1VB : CN415
Output to the SLG board
+5.1VB : CN416
Output to the finisher
+12VA : CN412
Output to the SYS board
+12VB : CN412
Output to the SYS board
+12VB : CN413
Output to the LGC board
+12VB : CN415
Output to the SLG board
-12VA : CN412
Output to the SYS board
-12VB : CN412
Output to the SYS board
+24VB : CN413
Output to the FAX board
Pins 13, 14, 15 and 16
Pins 19 and 20
Pin 1
Pins 17 and 18
Pins 24 and 26
Pin 25
Pins 3 and 4
Pin 11
Pins 5 and 6
Pins 21 and 22
Pin 1
Pin 7
Pin 5
Pin 7
Pin 15
Pin 9
Pin 3
Pin 13
15 - 2 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
05/11