Toshiba e-STUDIO453 Service Manual page 65

(8) Lift up the equipment and take off the LCF.
[D] MJ-1022 (Hanging finisher)
(D-1) When PFP/LCF is not installed
(1) Turn OFF the power and unplug the power
cable.
(2) Take off the connector cover and disconnect
the connector.
(3) Remove 2 screws and take off the safety
bracket on the rear side and the cover.
(4) Remove 2 screws and take off the safety
bracket on the front side and the cover.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-617
Fig. 2-618
Fig. 2-619
Fig. 2-620
2 - 45 e-STUDIO350/352/353/450/452/453
OUTLINE OF THE MACHINE
2