13.4.6 Abnormality in the IH control circuit
When an abnormality is detected in the IH control circuit, it stops the power supply to the IH coil and
displays a message "call for service".
(1) IH control circuit
CPU output level of the IH control circuit changes depending on the condition of IH coil. This out-
put level goes through the photocoupler into the gate array.
LGC board
Engine CPU
PA2
PA3
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
IH board
5V SW
H1ERR1
H1ERR2
Fig. 13-407
13 - 13
05/11
VDD
CPU
e-STUDIO350/352/353/450/452/453
FUSER UNIT / PAPER EXIT SECTION
13