(6) Disconnect 2 connectors.
(7) Remove 5 screws and take off the gear unit.
[D] Developer drive clutch
(1) Take off the gear unit (
(2) Remove 2 screws and take off the bracket.
(3) Remove the bushing and take off the devel-
oper drive clutch.
Note:
Match the protruding portion of clutch with
the position shown in the drawing for as-
sembling.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Chapter 10.4 [C]).
Bracket
Bushing
Developer drive
10 - 5
04/01
Fig. 10-405
Gear unit
Fig. 10-406
Screw
clutch
Fig. 10-407
e-STUDIO350/352/353/450/452/453
Connector
Screw
10
Screw
DRIVE SYSTEM