(5) Disconnect 1 connector and remove 1 screw
and take off the ground wires.
(6) Remove the snap pin and slide ADU to the
rear side to take it off.
Note:
Since the jam access cover of the
e-STUDIO352/353/452/453 does not lock,
14
be sure to fix it temporarily with adhesive
tape or such before taking off the ADU.
[B] ADU inside rear cover
(1) Take off the ADU (
(2) Remove 2 screws and take off the ADU
inside rear cover.
e-STUDIO350/352/353/450/452/453
AUTOMATIC DUPLEXING UNIT
Chapter 14.5 [A]).
4 - 2
07/11
Connector
Ground wire
Fig. 14-505
Fig. 14-506
Tape
Fig. 14-507
Screw
ADU inside
rear cover
Fig. 14-508
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Screw
Snap pin