Installing The Ip Office Mib Files - Avaya IP Office Installation Manual

9.8.2 Installing the IP Office MIB Files

To allow full communication between an SNMP agent and an SNMP manager, the SNMP manager must load MIB files
(Management Information Base) specific to the SNMP agent device and the features it supports. These MIB files contain
details of the information the agent can provide and the traps that it can send. Full details of the structure of the IP Office
MIB files, MIB groups within those files and event traps can be found in the "IP Office Installation Manual".
The MIB files for IP Office operation are included on the IP Office Admin CD in the folder C:\smnp_mibs. The actual files
required and the method of loading depend on the SNMP manager application being used. The details below cover the
two SNMP manager applications tested.
HP Open View Network Node Manager
1. Copy the following MIB files to the applications MIBs folder.
MIB File
a. rfc2737-entity-mib.mib
b. avayagen-mib.mib
c. ipo-prod-mib.mib
d. ipo-mib.mib
e. inet-address-mib.mib
f. rfc2213-integrated-services-mib.mib
g. diffserv-dscp-tc.mib
h. diffserv-mib-hpov.mib
i. ipo-phones-mib.mib
2. Start the OpenView Network Node Manager console.
3. Select Options and then Load/Unload MIBs: SNMP.
4. Select Load and select all the MIB files listed above.
5. Select Compile.
IP Office Installation
IP Office
Source
snmp_mibs\standard folder on OpenView Install CD.
snmp_mibs\IPOffice folder on IP Office Admin CD.
snmp_mibs\IPOffice folder on IP Office Admin CD.
snmp_mibs\IPOffice folder on IP Office Admin CD.
snmp_mibs\Standard folder on IP Office Admin CD.
snmp_mibs\standard folder on OpenView Install CD.
snmp_mibs\Standard folder on IP Office Admin CD.
snmp_mibs\Standard folder on IP Office Admin CD.
snmp_mibs\IPOffice folder on IP Office Admin CD.
Additional Processes: SNMP
15-601042 Issue 20b (16 July 2009)
Page 185