Display; Handset Display; Caller Id Display - Panasonic KX-TCD445BXS Service Manual

KX-TCD445BXS / KX-TCD445BXT / KX-TCD445BXF / KX-A144BXS / KX-A144BXT / KX-A144BXF /

7 DISPLAY

7.1.

Handset Display

For Service Hint:
icon will be displayed if the unit took a signal from Telephone Company as a Voice Message signal.
In that case, press the left button of the Navigator Key for a while.
7.2.

Caller ID Display

Important:
This unit is Caller ID compatible. To display the caller's phone number, you must subscribe to Caller ID service. After
subscribing to Caller ID service, this unit will display caller information.
How Caller ID is displayed
The unit will display the calling party's phone number after the first ring. You can view the caller information of the last 50
different callers.
When new calls have been received, the display will show the number of new calls.
The number of new calls will be cleared after viewing all caller information.
Example: 4 new calls have been received.
Note:
• When you receive a call from the same phone number you stored with a name in the phonebook, the display will show the
stored name.
• If the unit is connected to a PBX system, you may not receive the caller information.
• When the caller dialled from an area which does not provide Caller ID service,
• When the caller requested not to send caller information, either no information or
• The display will not show caller information while using the handset for an intercom call. However, the caller information will
be stored.
• Certain service providers send caller information between the first and second ring. If the display does not show caller
information after a few rings, follow these instructions to set DTMF mode.
18
will be displayed.
will be displayed.