Software Download; Unit View - Trane R Series Installation, Operation And Maintenance Manual

Controls Interface
Note: Important: Performing anyTracer CH530 service
functions should be done only by a properly
trained service technician. Please contact your
localTrane service agency for assistance with any
service requirements.
TechView software is available viaTrane.com.
(http://www.trane.com/Commercial/DesignAnalysis/
TechView.aspx)
This download site provides a user theTechView
installation software and CH530 main processor software
that must be loaded onto your PC in order to service a
CH530 main processor.TheTechView service tool is used
to load software into theTracer CH530 main processor
Minimum PC requirements to install and
operate TechView
• Microsoft Windows XP Professional, Windows
Vista Business or Windows 7 Enterprise
• Internet Explorer 6.0 or higher
• USB 2.0 or higher
• Pentium II, III or higher processor
• 128Mb RAM minimum forTechView, 1G
recommended for total Windows system
• 1024 x 768 resolution of display
• CD-ROM (optional for copyingTechView install to
CD)
• 56K modem (optional for internet connection)
• 9-pin RS-232 serial connection (optional for
connection to DynaView)
Note: TechView was designed for the preceding listed
laptop configuration. Any variation will have
unknown results.Therefore, support forTechView
is limited to only those operating systems that
meet the specific configuration listed here. Only
computers with a Pentium II class processor or
better are supported; Intel Celeron, AMD, or Cyrix
processors have not been tested.
TechView is also used to perform any CH530 service or
maintenance function. Servicing a CH530 main processor
includes:
• Updating main processor software
• Monitoring chiller operation
• Viewing and resetting chiller diagnostics
• Low Level Intelligent Device (LLID) replacement and
binding
• Main processor replacement and configuration
modifications
• Setpoint modifications
• Service overrides
118

Software Download

Instructions for First Time TechView Users
This information can also be found at http://
www.trane.com/Commercial/DesignAnalysis/
TechView.aspx.
1. Create a folder titled CH530 (C:\CH530) on your hard
drive.This \CH530 folder is the standard location for
the installation file. Storing the installation file in this
location helps you remember where it is stored and
makes it easier for technical support personnel to
assist you.
2. Click the Download link for the latest version on the
TechView Software Download page.
3. Complete the registration form provided. An e-mail
containing a download link will be sent to the address
you provide.
4. Open the e-mail sent by theTechView administrator.
Click the link included to begin download.
Note: If the download window does not open
immediately, look for a yellow highlighted
message near the top of your browser. Click on the
message line to see your options.
Note: The link can only be used once.
5. Click Save to copy the installation file to your hard
drive. Specify the \CH530 folder you created in Step 1
on the Save dialog box.
6. Double-click the installation (.exe) file.The License
Agreement dialog box appears.
7. Click I Agree after reviewing the License Agreement.
The Choose Components dialog box appears. All
components are selected by default. (These are the
actual MP versions for all units.) Deselect any
components you do not want included in the
installation.
Note: Deselecting components reduces the size of the
installed application.
8. Click Install.The installation dialog appears with a
progress meter indicating the percentage of the
installation that has occurred. An installation
information file appears when the installation is
complete.
• Click Close to exit the installation routine.

Unit View

Unit view is a summary for the system organized by chiller
subsystem.This provides an overall view of chiller
operating parameters and gives you an "at-a-glance"
assessment of chiller operation.
The Control Panel tab displays important operating
information for the unit and allows you to change several
key operating parameters.The panel is divided into four or
RTAC-SVX01J-EN