Maintenance
Figure 45. Oil system schematic
Oil system consists of the following components:
•
Compressor
•
Oil separator
•
Discharge line with service valve
•
Oil line from separator to compressor
•
Oil line drain (lowest point in system)
•
Oil cooler - optional
•
Oil temperature sensor
•
Oil line shut off valve with flare service connection
•
Oil filter (internal to compressor) with flare fitting
service connection and schrader valve
•
Oil flow control valve (internal to the compressor after
the filter)
•
Oil return line from evaporator with shut off valve and
strainer
Refer to
Table 1, p. 12 throughTable 10, p. 21
standard oil charge for each circuit.
Note: Recommendation: check the oil level in the sump
using a sight glass or a manometer, attached to
charging hoses.
144
for the
RTAC-SVX01J-EN