Table of Contents
Advertisement
Figure 10
General wiring interconnect
for the VClink
VClink Codec Master Control System
Wiring the System
Overview
A general overview of the wiring interconnect for the VClink is shown in Figure 10.
Detailed connection information is provided in the following paragraphs.
TiltCam
CAMERA
DISPLAY
AXlink
MIC
SPKR
SUB
AXlink
Wiring Devices to the AXB-EM232
The AXB-EM232 has four captive-wire connectors on the rear panel (Figure 11) for
AXlink, two serial connectors (RS-232 and RS-232/RS-422), and 12 VDC power.
Port 1 serial connector is an eight-wire RS-232/422 captive wire connector. Port 2
is a six-wire RS-232 captive-wire connector. The AXlink connector is a four-wire,
captive-wire connector for data and power. The PWR connector is a two-wire, cap-
tive-wire connector for the 12VDC power supply.
Codec
Video In 4
Video Out 1
AXB-EM232
Front Rear
Audio In 2
Audio Out 1
Port 2
PWR
AXlink
Port 2
PS4.2
Wiring the System
13
Advertisement
Table of Contents
