Introduction; Minimum System Requirements; Program Files; Features - AMX IRLIB Instruction Manual

Infrared library management program

Table of Contents

Note

The Control Disc contains a

library of existing IR files from

various manufactures.

IRLIB Infrared Library Management Program

Introduction

IRLIB is used to manage Infrared (IR) control functions created with an IRIS Infrared

Capture Unit. The IRIS unit captures IR functions and sends them to the IRLIB Li-

brary Management Program. The IRLIBX program and the AXCESS Central Control-

ler/NetLinx Integrated Controller Systems provide you with unlimited IR control

capability.

Once library of IR functions is created, you can use the IRLIBX program to arrange

them as needed for your particular system application. Your selections can then be

sent to any controllable device.

Your computer must have MS-DOS version 2.1 or higher installed to run the IRLIBX

program. IRLIBX requires a minimum 640 KB of memory (RAM) or higher.

The executable IRLIB program file is IRLIBX.EXE. The IRLIBX program uses conven-

tional 640 KB memory and also extended memory to maintain a large number of

hand control files in a single directory.

IRLIB features include:

•

Compatibility with any IBM PC, XT, AT, or compatible computer

•

Contains pull-down menus for building and managing your hand control

files

•

Provides the ability to create multiple IR-control libraries for hundreds of

different controllers

Introduction

Table of Contents