Edit Speed Dial Location - AMX Codec Master Control System Instruction Manual

Figure 26
Keyboard window
VClink Codec Master Control System
Using the "Prev Page <<" and "Next Page >>" buttons locate the speed dial
1.
name you wish to map.
Press the desired speed dial name.
2.
Press "Store."
3.
Press the display location you desire.
4.
Press "Edit Directory Entries" to return to the Speed Dial Setup page.
5.

Edit speed dial location

To edit the speed dial location:
Access the speed dial location you wish to enter (or modify) using the "NEXT
1.
>>" or "PREVIOUS <<" buttons, or select the "Entry Number" button and en-
ter the speed dial location number on the keypad window, followed by the
"STORE" button.
Press the "Name" button to open a keyboard window (Figure 26).
2.
Setup Wizard 29