12
Installation
Place the front panel of the AXB-EM232 on the front of the rack, over the unit,
6.
and secure with the screws removed in step 2.
Mounting the PS4.2
To rack-mount the PS4.2 with the AC-RK Accessory Rack Kit, follow these steps.
Remove any connected power, AXlink, and communication connectors from
1.
the rear panel of the PS4.2.
Remove the two screws on the front panel of the PS4.2.
2.
Remove the front panel and the space bracket behind the panel.
3.
Place the unit in the right opening in the AC-RK.
4.
Place the front panel of the PS4.2 on the front of the rack, over the unit, and
5.
secure using the screws removed in step 2.
Mounting the AC-RK Assembly
We recommend that you mount the AC-RK assembly (containing the AXB-EM232
and PS4.2) directly below the Tandberg 2000 Series codec. This location enables
you to easily connect all interconnect cables furnished with the system.
VClink Codec Master Control System