Touch Panel Interface - Support Pages
The touch panel pages illustrated in this document represent the GUI for Modero
(G4) touch panels. These pages will appear slightly different on G3 panels, but will
work basically the same.
The touch panel user-interface is broken down into several groups of screens/pages. Some groups
consist of only one page while others may consist of several.
Touch Panel Interface - Logo Page
The Logo Page (FIG. 1) is displayed when you press the Exit button on the main window. This
page is intended to be customized by the installer.
FIG. 1 Touch Panel Interface - Logo Page
Touch Panel Interface - System Information Page
The System Information page (FIG. 2) is accessed by pressing the help icon on the Logo page
(FIG. 1). The information on this screen is gathered by the GUI and is built into the touch panel file.
There also several buttons along the bottom of this screen:
Design XPress User Interface Guide
SETUP: Opens the Touch Panel Setup page (FIG. 3).
Sleep: Immediately puts the touch panel into sleep mode.
i!-Weather Configure: Opens the Weather Config page (FIG. 4), where you can
configure and activate your i!-Weather account. This account must be activated before
any weather data can be retrieved.
Clean: Opens the "clean screen", which disables the touch screen for one minute, to
allow you to clean the screen.
Touch Panel Interface - Support Pages
Help icon
1