Working with System Files
Refer to the Cafe Duet online help file for details on creating JAR module files.
Minimum Support Requirements for Duet Modules
Creating a New Module File
To create a new Module file (that is not associated with a System).
1.
Click File > New, and select Module File in the New dialog (FIG. 97).
FIG. 97
New dialog - Module File selected
2.
Click OK to close this dialog and open the File Template dialog (FIG. 98).
FIG. 98
File Template dialog
3.
Select Yes (default) or No, and click Next to proceed.
4.
In this dialog, select a module template to use to create the file (NetLinx Module Template or User-Defined
Template), and click Next to proceed. (FIG. 99).
52
NetLinx Studio v2.3
NetLinx Master Firmware build 304
If you select Yes, click Next to proceed to the next File Template dialog (see Step 4).
If you select No, click Next to proceed to the New File Location dialog (see Step 6).
NetLinx Studio - Instruction Manual