Working With Block Files; Creating A New Block File - AMX NetLinx Studio Instruction Manual

If you select multiple files to add to the System, the program will prompt you to edit
the file properties for each file before adding them.
5.
Click OK to add the file to the selected System.
The file should now appear in the Include folder under the selected System. Double-click to open the file in an Editor
window (FIG. 85).
FIG. 89 Workspace tab - Include File Added

Working with Block Files

Block Files (*.axb) represent blocks of re-usable code. Block files are saved in the Source folder, and can be referenced
in the main Source Code (FIG. 90).
FIG. 90 Workspace tab - Block File

Creating a New Block File

To create a new Block file (that is not associated with a System).
1.
Select New from the File menu to open the New dialog (FIG. 91).
FIG. 91 New dialog - Block File selected
2.
Select Block File and click OK to open the New Block File dialog (FIG. 92).
FIG. 92
New Block File dialog
NetLinx Studio - Instruction Manual
Working with System Files
49