Enable Netlinx Device Notifications; Disable Netlinx Device Notifications; Enable Push Message Status Bar Display - AMX NetLinx Studio Instruction Manual

Enable NetLinx Device Notifications

Select Enable NetLinx Device Notifications from the Diagnostics menu (or use the toolbar button) to enable the
notification messages specified in the NetLinx Device Notifications dialog (see NetLinx Device Notification Options on
page 167). The resulting notification messages are displayed in the Notifications tab of the Output Bar (FIG. 251).
FIG. 251 Output Bar - Notifications tab

Disable NetLinx Device Notifications

Select Disable NetLinx Device Notifications from the Diagnostics menu (or use the toolbar button) to disable NetLinx
notifications. This command is only available if NetLinx Device Notifications are currently enabled.
To clear the Notifications tab, right-click in the tab and select Clear.

Enable Push Message Status Bar Display

Select Diagnostics > Enable Push Message Status Bar Display to display Push messages in the Status Bar. The Push
Message Status Bar Display indicates the status of Push messages sent to the Master (FIG. 252).
FIG. 252 Push Message Status Bar Display
See the Push Messages section on page 76 for more information.
NetLinx Studio - Instruction Manual
Diagnostics Menu Options
171