Url Listing; Creating A Url List - AMX NetLinx Studio Instruction Manual

2.
Enter the Device and System numbers that you want to assign to the device in the (Change to Device) Device and
System text boxes.
3.
Click the Start Identify Mode button to place the named System in ID Mode. The field below this button displays
a Waiting...Press Cancel to Quit message. The Start Identify Mode button changes to Cancel Identify Mode (click
to cancel ID Mode).
4.
Generate an event from the device that you want to assign the new Device and System numbers to:

For control panels, press any button to generate a Push.

For Masters, press the ID button on the rear panel.
5.
The device that generated an event is assigned the new Device and System numbers. The Online Tree will refresh to
represent the new device address.

URL Listing

Use the URL Listing dialog to create a URL List for the specified master. The URL List identifies all NetLinx devices
present in the same System as the Master that you are connected to (FIG. 257).
FIG. 257 URL Listing dialog
You must enter a URL for each device in the System before you can use ID Mode on other devices.
Only devices defined in the URL list will appear in the Online Tree (with the exception
of the Master that you are connected to).

Creating a URL List

1.
Select Diagnostics > URL Listing to access the URL Listing dialog.
2.
Enter the System and Device numbers for the Master that you are connected to in the appropriate text boxes. The
range is 0-65535.
3.
To add a device to the URL List, click Add. This opens the Add URL dialog (FIG. 258).
FIG. 258 Add URL dialog
4.
Enter the web address (URL or IP Address) of the device in the URL field and click OK to return to the URL List
dialog.
NetLinx Studio - Instruction Manual
Diagnostics Menu Options
177