Copying And Pasting Projects; Importing A Project - AMX NetLinx Studio Instruction Manual

Working with Projects
FIG. 43 New Project Properties dialog
2.
Enter an Identifier (name) for the Project (required). The Identifier can have a maximum of 128 characters, and
must be unique within the open Workspace file.
3.
Enter Dealer, Designer, Sales Order, and Purchase Order info (maximum of 128 characters each), and a
Description for the Project (maximum of 2,000 characters). These fields are all optional.
4.
Click OK to add the new Project to the active Workspace.

Copying and Pasting Projects

The Copy Selected Project and Paste Project options allow you to develop a core Project which you can then copy, paste,
and modify as necessary (within the active Workspace). In cases where there are only minor variations from one Project
to the next, this can be a real timer-saver:
1.
In the Workspace tab, right-click on the Project folder and select Copy Selected Project.
2.
Right-click on the Workspace file, and select Paste Project from the Workspace context menu to open the Project
Properties dialog (FIG. 44).
FIG. 44 Project Properties dialog
3.
Edit the Identifier to give this Project a unique name.
4.
Fill in the other fields and click OK to save changes and close this dialog.
The Project appears in the current Workspace, with the new Identifier.

Importing a Project

See Importing from Exported Workspace Files on page 22.
26 NetLinx Studio - Instruction Manual