Code Wizard - Creating Send_Commands - AMX NetLinx Studio Instruction Manual

Programming
FIG. 160
Data Event Code Wizard dialog 2
4.
Enter the name of the device for which this Data Event will be created in the Device field, and enter a descriptive
comment for the generated Data Event code in the Comment field if desired.
5.
Click Finish to close the Code Wizard. The generated code is added to the code file in the active Editor window.

Code Wizard - Creating SEND_COMMANDs

1.
With I want to generate a SEND_COMMAND selected, click Next to proceed to the next dialog in the Wizard
(FIG. 159).
FIG. 161 SEND_COMMAND Code Wizard dialog 1
2.
Specify the type of SEND_COMMAND to create:



3.
Click Next to proceed to the next dialog (FIG. 160).
88
PAGE - Make a new page visible on a touch panel
@PPN - Make a new popup page visible on a touch panel
If either of these options are selected, enter the desired Page Name in the text box provided. Note that if a
Page option is selected, the Text option (below) is disabled.
^TXT or @TXT - Change the text of a button on a touch panel
If this option is selected, specify the Variable Text Channel (for the target button), and enter the replacement
Text for that button in the field provided.
NetLinx Studio - Instruction Manual