Show Switch Files - Alcatel-Lucent OmniSwitch AOS Release 6 Manual

Managing the Directory Structure (Non-Redundant)

Show Switch Files

The files currently installed on a switch can be viewed using the
command displays the files currently in the specified directory.
To display files on a switch, enter the show microcode command with a directory, as shown:
-> show microcode certified
Package
-----------------+---------------+--------+-----------------------------------
Kadvrout.img
Kbase.img
Kdiag.img
Keni.img
Kos.img
Ksecu.img
If no directory is specified, the files that have been loaded into the running configuration are shown.
To display the date when the archive was last updated, enter the show microcode command with the
history keyword, as shown:
-> show microcode history
Archive Created 10/1/04 6:49:34
page 5-24
Release Size
6.3.1.311.R01 823614 Alcatel Advanced Routing
6.3.1.311.R01 7372509 Alcatel Base Software
6.3.1.311.R01
6.3.1.311.R01 2486643 Alcatel Ethernet Network Interfaces
6.3.1.311.R01 941331 Alcatel Operating System
6.3.1.311.R01 371661 Alcatel Security
OmniSwitch AOS Release 6 Switch Management Guide
Managing CMM Directory Content
show microcode
Description
5215 Alcatel Diagnostics Archive
command. This
July 2010