Script File Errors; Error Description Table - Alcatel-Lucent OmniSwitch AOS Release 6 Manual

Troubleshooting
Error Type Error
DHCP
DHCP Response not received in 30s.
Response Failed!
Timeout
Remote Configuration Download
cannot proceed.
TFTP Response
Instruction File not Downloaded
Timeout
and the Max try 3 For TFTP reached.
Primary/
Download of file: <File name and
Secondary pathname> from Primary Server
Failed
Server
Connection
Starting download of file: <File
name and pathname> from Secondary
Server
Download Failed - <File name and
pathname> using both Pri & Sec IP
File Download
Transfer error <File name and
and File pathname>
Location Errors
Download failed for configuration
file <File name and pathname>
Not all image files are downloaded
Unable to download the firmware
version
Unable to download boot config file
Unable to download AlcatelDebug.cfg
Unable to download script file

Script File Errors

The different types of script file errors and the troubleshooting techniques for such errors are as follows:
•
If any script file command fails, it is logged into a file *.err (* is the script file name) in the /flash
directory and the remaining commands are implemented. In such an instance, check the *.err file. The
script file commands can be manually implemented and debugged in the order specified in the script
file.
•
If the script file name mentioned in the instruction file is incorrect, then an error is logged in the switch
log or swlog.log file. In such an instance, check the swlog.log file. The script file can be downloaded
manually from the FTP/SFTP servers and implemented onto the OmniSwitch.

Error Description Table

The following error description table provides information about some of the common script file errors
that occur during Automatic Remote Configuration:
page 8-16
Managing Automatic Remote Configuration Download
Description
DHCP server is down or not available.
Instruction file not downloaded due to TFTP
not reachable.
File download failure from primary server.
File download failure from both primary and
secondary server.
File transfer failure.
Configuration file download failure.
Some of the image files are not downloaded.
File location errors occur when the
corresponding files are not available in the
locations as mentioned in the instruction file.
OmniSwitch AOS Release 6 Network Configuration Guide July 2010