Displaying Cmm Conditions - Alcatel-Lucent OmniSwitch AOS Release 6 Manual

Displaying CMM Conditions

Displaying CMM Conditions
To show various CMM conditions, such as where the switch is running from and which files are installed,
use the following CLI show commands:
show running-directory
show reload
show microcode
show microcode history
For more information on the resulting displays from these commands, see the OmniSwitch CLI Reference
Guide. An example of the output for the show microcode command is given in
page 5-24.
page 5-36
Shows the directory from where the switch was booted.
Shows the status of any time delayed reboot(s) that are pending on the
switch.
Displays microcode versions installed on the switch.
Displays the archive history for microcode versions installed on the
switch.
OmniSwitch AOS Release 6 Switch Management Guide
Managing CMM Directory Content
"Show Switch Files" on
July 2010