Setting Up End-User Profiles - Alcatel-Lucent OmniSwitch AOS Release 6 Manual

Setting Up End-User Profiles

Setting Up End-User Profiles
End-user profiles are designed for user accounts in the carrier market. With end-user profiles, a network
administrator can configure customer login accounts that restrict users to particular command areas over
particular ports and/or VLANs.
End-user profiles are only managed and stored on the switch; profiles are not stored on external servers.
Note. End-user profiles cannot be used in conjunction with user partitioned management; the features are
mutually exclusive.
The following table shows the end-user command areas and the commands associated with each area:
Area Keyword
physical
vlan-table
mac-filtering-table
spantree
basic-ip-routing
ip-routes-table
page 10-20
Available Commands
trap port link
flow
flow wait
interfaces admin
vlan
vlan stp
vlan authentication
vlan router ipx
vlan port default
show vlan
show vlan port
show vlan router mac status
vlan 802.1q
vlan 802.1q frame type
vlan 802.1q force tag internal
show 802.1q
mac-address-table
mac-address-table aging-time
show mac-address-table
show mac-address-table count
show mac-address aging-time
show spantree
show spantree ports
show arp
show ip route
OmniSwitch AOS Release 6 Switch Management Guide
Managing Switch User Accounts
interfaces alias
interfaces
interfaces no L2 statistics
show interfaces
vlan dhcp mac
vlan dhcp mac range
vlan dhcp port
vlan dhcp generic
vlan binding mac-ip-port
vlan binding mac-port-protocol
vlan binding mac-port
vlan binding mac-ip
vlan binding ip-port
vlan mac
vlan mac range
vlan ip
vlan ipx
vlan protocol
vlan user
vlan port
vlan port mobile
vlan port default vlan restore
vlan port authenticate
show vlan rules
show vlan port mobile
July 2010