Multiple User Sessions; Listing Other User Sessions - Alcatel-Lucent OmniSwitch AOS Release 6 Manual

Multiple User Sessions

Multiple User Sessions
Several CLI commands give you information about user sessions that are currently operating on the
OmniSwitch, including your own session. These commands allow you to list the number and types of
sessions that are currently running on the switch. You can also terminate another session, provided you
have administrative privileges.

Listing Other User Sessions

The who command displays all users currently logged into the OmniSwitch. The following example shows
use of the who command and a resulting display:
-> who
Session number = 0
User name = (at login),
Access type = console,
Access port = Local,
IP address = 0.0.0.0,
Read-only rights
Read-Write rights
Read-only domains
Read-only families
Read-Write domains
Read-Write families = ,
Session number = 1
User name = admin,
Access type = http,
Access port = NS,
IP address = 123.251.12.51,
Read-only rights
Read-Write rights
Read-only domains
Read-only families
Read-Write domains
Read-Write families = ,
Session number = 3
User name = admin,
Access type = telnet,
Access port = NI,
IP address = 123.251.12.61,
Read-only rights
Read-Write rights
Read-only domains
Read-only families
Read-Write domains
Read-Write families = ,
The above display indicates that three sessions are currently active on the OmniSwitch. Session number 0
always shows the console port whenever that port is active and logged in. The other sessions are identified
by session number, user name, the type of access, port type, IP address, and user privileges. The output
definitions are defined in the table on
page 6-20
= 0x00000000 0x00000000,
= 0x00000000 0x00000000,
= None,
= ,
= None,
= 0x00000000 0x00000000,
= 0xffffffff 0xffffffff,
= None,
= ,
= All ,
= 0x00000000 0x00000000,
= 0xffffffff 0xffffffff,
= None,
= ,
= All ,
page 6-21.
OmniSwitch AOS Release 6 Switch Management Guide
Using the CLI
July 2010