Displaying Cmm Conditions - Alcatel-Lucent OmniSwitch 6850-48 Management Manual

Managing CMM Directory Content

Displaying CMM Conditions

To show various CMM conditions, such as where the switch is running from and which files are installed,
use the following CLI show commands:
show running-directory
show reload
show microcode
show microcode history
For more information on the resulting displays from these commands, see the OmniSwitch CLI Reference
Guide. An example of the output for the show microcode command is given in
page 5-23.
OmniSwitch AOS Release 6 Switch Management Guide
Shows the directory from where the switch was booted.
Shows the status of any time delayed reboot(s) that are pending on the
switch.
Displays microcode versions installed on the switch.
Displays the archive history for microcode versions installed on the
switch.
September 2009
Displaying CMM Conditions
"Show Switch Files" on
page 5-31