Table of Contents
Advertisement
Command
Description
Query/set the SRQ mask conditions.
MASK
Enable/Disable GPIB I/O overlap mode.
OLAP
OPEN
Open one or more relays (channels/bits) on the plug-in modules.
Re-assert the channel/bit setup stored by the command STORE (1-10).
RECALL
Reset the instrument to its power on state. All channels/bits of the plug-in
RESET
modules are open, etc.
Specify a sequence of channels/bits to be scanned.
SLIST
Specify a system mode (SCPI or 3488A) for the instrument.
SYSMODE
SYSMODE?
Query the instrument's system mode.
Read back the read-only port on a 44475A Breadboard module
SREAD
(for 44475A only).
Write data to the static write-only port on a 44475A Breadboard module
SWRITE
(for 44475A only).
Query the Status Byte of the 3499A/B/C.
STATUS
STEP
Sequence through a scan list set up by SLIST.
Store the current of the instrument in the specified register number (1-10).
STORE
Cause the 3499A/B/C to perform an internal self-test.
TEST
VIEW
Query the state of a particular channel/bit.
Chapter 5 Remote Interface Reference
3488 Mode Command Quick Reference
Page
122
123
124
4
125
125
126
127
127
128
5
129
130
131
131
132
133
103
Advertisement
Table of Contents
