3488 Mode Command Quick Reference - Agilent Technologies 3488 User Manual

Command Description
Open the last channel/bit closed and close the specified channel/bit.
CHAN
Close one or more relays (channels/bits) on the plug-in modules.
CLOSE
CMON Monitor the open/close states of a plug-in module in the specified slot.
Reset one or multiple cards in the specified slot(s) to their default states.
CRESET
Pair up two plug-in modules of the same type.
CPAIR
CTYPE Query the module's identification in the specific slot.
DBR Read digital I/O port.
Output a block of binary data to the specified digital I/O port.
DBW
5
Insert a delay time during scanning.
DELAY
DISP Write a message to display.
Establish the handshake mode, polarity and trigger configuration of the
DMODE
DIO module.
DOFF Turn off the front panel display of the instrument.
DON Turn on the front panel display of the instrument.
Read the status of a digital I/O port as inputs.
DREAD
Output a block of data to the specified digital I/O port.
DWRITE
EHALT Enable/Disable the stop-on-error mode.
Query Error register.
ERROR
Query the instrument's identity.
ID?
LOCK Activate or deactivate locking out the keyboard of the instrument.
Chapter 5 Remote Interface Reference

3488 Mode Command Quick Reference

3488 Mode Command Quick Reference
102
Page
104
105
106
106
107
108
110
112
113
114
115
117
117
118
120
121
121
121
122