Table 29-3 Menu 11.8 Advance Setup Options - ZyXEL Communications Prestige 652H series User Manual

Prestige 652H/HW Series User's Guide
FIELD
PPPoE+
PPPoE_Client_PC
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
29-12

Table 29-3 Menu 11.8 Advance Setup Options

Press [SPACE BAR] to select Yes and press [ENTER] to enable PPPoE pass
through. In addition to the Prestige's built-in PPPoE client, you can enable PPPoE
pass through to allow up to ten hosts on the LAN to use PPPoE client software on
their computers to connect to the ISP via the Prestige. Each host can have a
separate account and a public WAN IP address.
PPPoE pass through is an alternative to NAT for applications where NAT is not
appropriate.
Press [SPACE BAR] to select No and press [ENTER] to disable PPPoE pass
through if you do not need to allow hosts on the LAN to use PPPoE client software
on their computers to connect to the ISP.
DESCRIPTION
Remote Node Configuration