Table 16-9 Vpn Manual Setup - ZyXEL Communications Prestige 652H series User Manual

Prestige 652H/HW Series User's Guide
The following table describes the fields in this screen.
LABEL
IPSec Setup
Active
Name
IPSec Key Mode
SPI
Encapsulation Mode
DNS Server (for
IPSec VPN)
Local
Local IP addresses must be static and correspond to the remote IPSec router's configured remote IP
addresses.
Two active SAs cannot have the local and remote IP address(es) both the same. Two active SAs can have
the same local or remote IP address, but not both. You can configure multiple SAs between the same local
and remote IP addresses, as long as only one is active at any time.
Local Address Type
IP Address Start
End / Subnet Mask
16-24

Table 16-9 VPN Manual Setup

Select this check box to activate this VPN policy.
Type up to 32 characters to identify this VPN policy. You may use any character,
including spaces, but the Prestige drops trailing spaces.
Select IKE or Manual from the drop-down list box. Manual is a useful option for
troubleshooting if you have problems using IKE key management.
Type a number (base 10) from 1 to 999999 for the Security Parameter Index.
Select Tunnel mode or Transport mode from the drop-down list box.
If there is a private DNS server that services the VPN, type its IP address here. The
Prestige assigns this additional DNS server to the Prestige 's DHCP clients that
have IP addresses in this IPSec rule's range of local addresses.
A DNS server allows clients on the VPN to find other computers and servers on the
VPN by their (private) domain names.
Use the drop-down menu to choose Single, Range, or Subnet. Select Single for a
single IP address. Select Range for a specific range of IP addresses. Select Subnet
to specify IP addresses on a network by their subnet mask.
When the Local Address Type field is configured to Single, enter a (static) IP
address on the LAN behind your Prestige. When the Local Address Type field is
configured to Range, enter the beginning (static) IP address, in a range of
computers on your LAN behind your Prestige. When the Local Address Type field
is configured to Subnet, this is a (static) IP address on the LAN behind your
Prestige.
When the Local Address Type field is configured to Single, this field is N/A. When
the Local Address Type field is configured to Range, enter the end (static) IP
address, in a range of computers on the LAN behind your Prestige. When the Local
Address Type field is configured to Subnet, this is a subnet mask on the LAN
behind your Prestige.
DESCRIPTION
VPN Screens