Prestige 652H/HW Series User's Guide
VPN tunnel each time the remote secure gateway's WAN IP address changes (there may be a delay until the
DDNS servers are updated with the remote gateway's new WAN IP address).
16.4.1 Dynamic Secure Gateway Address
If the remote secure gateway has a dynamic WAN IP address and does not use DDNS, enter 0.0.0.0 as the
secure gateway's address. In this case only the remote secure gateway can initiate SAs. This may be useful
for telecommuters initiating a VPN tunnel to the company network. See section 16.17 for configuration
examples.
The Secure Gateway IP Address may be configured as 0.0.0.0 only when using IKE
key management and not Manual key management.
16.5 VPN Summary Screen
The following figure helps explain the main fields in the web configurator.
Figure 16-1 IPSec Summary Fields
Local and remote IP addresses must be static.
Click VPN and Setup to open the VPN Summary screen. This is a read-only menu of your IPSec rules
(tunnels). The IPSec summary menu is read-only. Edit a VPN by selecting an index number and then
configuring its associated submenus.
VPN Screens
16-3